Computer-aided design (CAD) is the use of computers (or workstations) to aid in the creation, modification, analysis, or optimization of a design. CAD software is used to increase the productivity of the designer, improve the quality of design, improve communications through documentation, and to create a database for manufacturing.
Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) are two metal additive manufacturing processes that belong to the powder bed fusion 3D printing family. The two technologies have a lot of similarities: both use a laser to scan and selectively fuse (or melt) the metal powder particles, bonding them together and building a part layer-by-layer. Also, the materials used in both processes are metals that come in a granular form.
Binder Jetting is a family of additive manufacturing processes. In Binder Jetting, a binder is selectively deposited onto the powder bed, bonding these areas together to form a solid part one layer at a time. The materials commonly used in Binder Jetting are metals, sand, and ceramics that come in a granular form.
Material Jetting (MJ) is an additive manufacturing process that operates in a similar fashion to 2D printers. In material jetting, a printhead (similar to the printheads used for standard inkjet printing) dispenses droplets of a photosensitive material that solidifies under ultraviolet (UV) light, building a part layer-by-layer. The materials used in MJ are thermoset photopolymers (acrylics) that come in a liquid form.
Selective Laser Sintering (SLS) is an Additive Manufacturing process that belongs to the Powder Bed Fusion family. In SLS, a laser selectively sinters the particles of a polymer powder, fusing them together and building a part layer-by-layer. The materials used in SLS are thermoplastic polymers that come in a granular form.
Stereolithography (SLA) is an additive manufacturing process that belongs to the Vat Photopolymerization family. In SLA, an object is created by selectively curing a polymer resin layer-by-layer using an ultraviolet (UV) laser beam. The materials used in SLA are photosensitive thermoset polymers that come in a liquid form.
Fused Deposition Modeling (FDM), or Fused Filament Fabrication (FFF), is an additive manufacturing process that belongs to the material extrusion family. In FDM, an object is built by selectively depositing melted material in a pre-determined path layer-by-layer. The materials used are thermoplastic polymers and come in a filament form.
3D printing or additive manufacturing is a process of making three dimensional solid objects from a digital file.The creation of a 3D printed object is achieved using additive processes. In an additive process an object is created by laying down successive layers of material until the object is created. Each of these layers can be seen as a thinly sliced horizontal cross-section of the eventual object.
A thermodynamic system may be defined as any specified portion of matter in the universe which is under study. A system may consist of one or more substances. Or if we defined it in terms of physics then In physics, the term “system” usually refers to any set of physical interactions isolated from the rest of the universe. Anything outside of the system, including all factors and forces irrelevant to a discussion of that system, is known as the environment.e.g., portion of test tube where reaction is taking place, is called system.
Walking cycle is the concept; where treadmill is installed on cycle to propel or to give a motion. There’s also no seat—this is a walking-only affair. And like a regular bike, riders choose the gear or speed they want, ranging from four to 17 miles per hour. Model is created and rendered with solid works.
This model includes the 3d files of Dell Inspiron Laptop with real measurements.
This is the model of Fully assembled car with wheel to chassis and body. This model is created and rendered with solid-works. This is the first ever complex model developed by me.
This model is created as a purpose of practice. Model is created and Rendered with Solid works.
This is the model of latest phone Xperia M2; Launched by Sony in the year of 2014. Model is created and Rendered with Solid works.
A hoverbike (or hovercycle) is a vehicle that can hover, but that otherwise resembles a motorbike, mainly by having at least two propulsive portions – one in front of and one behind the driver. And it similar to work on the concept of UAV Drone. Model is created and rendered with Solidworks.
A ball valve is a shut-off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked. This model is created with solid works.
Welcome to The Tajagna Youth Club
